How can I fix a dripping Shower Head?

You will need to establish firstly whether the dripping is constant or if it stops over time. The easiest way to do this is to remove the head and hose from the shower or in the case of fixed heads, remove the head from the arm.

IF THE DRIP CONTINUES

This indicates a potential fault with your shower - please call our customer service team on 01959 560010 and select the appropriate option whether in or out of warranty. For further information on warranty periods, these can be found at the bottom of the product registration page - please click here to view this.
Please note: In order to claim under the Aqualisa Warranty, you will need to have registered your guarantee and provide a valid proof of purchase. We are unable to arrange any service call bookings or send free parts until this has been completed. If you have previously done this, you will not need to do this again.

IF THE DRIP STOPS

This is likely due to water retention and is not a product fault. Shower heads will continue to drip until the water level falls below the jets on the head. Restrictions can slow this process slower - we would advise to check for kinks or twists in the hose or lime scale blockages in the spray plate of the shower head. A kinked hose can be unravelled by removing it from the outlet and letting it naturally untwist. Limescale can be cleaned by soaking the head in warm water and white vinegar (2:1 ratio) for approx. 20 minutes. Our shower heads also feature rub clean jets - gently rotating the jets with your fingers to help break up any scale inside the jets.